Screen display:Impedance plan and time base scan are displayed on the screen in real time
Detection range:Longitudinal cracks and transverse defects (such as lapels), dark cracks, dark cracks, open cracks and other axial defects in the production of metal pipes, rods and wires
Full digital design:Ability to establish multiple standard testing procedures or expert systems within the instrument
Suitable for various probes:Such as external through type, rotary type, etc
Detection speed:1m/min~360m/min
Detection object:Metal pipe, bar, metal parts, production plant online quality inspection
Single probe, dual frequency:it is a single sensor input, single channel dual frequency eddy current tester
Wide filtering range:Suitable for dynamic detection
Minimum Order Quantity:1
Wide filtering range:Suitable for dynamic detection
Configurable probe connection:Bridge, reflection, absolute
Minimum Order Quantity:1
Fast, simple and reliable inspection technology:For detecting defects on or near the surface of electrically conductive materials
Multifrequency operation:1 channel: 8 frequencies; 2 channels: 4 frequencies; 4 channels: 2 frequencies
Multiple scanners can be connected:Imaging display with impedance plan and strip map or real-time AC scan
advanced:Using the most advanced computer digital technology, far field eddy current technology and multiple mixing technology
Powerful function:The detection signals of eight conventional vortex channels and two far-field vortex channels are obtained and displayed on the same screen.
Use one machine for two purposes:Two probes can be connected at the same time to realize the flaw detection and thickness detection at the same time or separately, and one machine is used as two machines
advanced:It adopts the most advanced FPGA/DSP digital electronic technology, far-field eddy current technology and microprocessor technology
Wide frequency range:With optional multiple detection programs, the same screen multi-window display mode, the same screen displays the phase and amplitude changes of multiple eddy current signals and their amplified waveforms. Multiple relatively independent detection channel
Detection object:can detect the inner and outer wall defects of ferromagnetic metal pipes in real time and effectively
advanced:t adopts the most advanced DSP and FPGA digital electronic technology, far-field eddy current technology and microprocessor technology
Good performance:With multi-frequency, eddy current detection instrument advanced performance, especially with high sampling rate and ultra-low noise and high signal-to-noise ratio
Wide detection range:Used to detect a variety of metal parts testing equipment including signal power source, signal measurement, signal recording and processing, made into a tube can pass the form
Extremely high detection sensitivity:A new generation of eddy current non-destructive testing equipment, which uses the most advanced DSP and FPGA digital electronic technology, far-field eddy current technology and microprocessor technology
Easy to operate:The surface of the material being tested does not need to be cleaned
High precision:The change of the gap between the outer diameter of the probe and the inner diameter of the material has little effect on the detection result
Gain margin:110dB
Frequency:0.4~20.0MHz
Detection range:0~6000.0mm
Working Environment:Temperature: -10℃~50℃, Humidity: ≤85%RH
Detection Principle:Eddy Current
Data Storage:128GB
Detection Accuracy:0.01mm
Detection Speed:0.1s
Data Transmission:USB, WIFI