Detection Host: NDT-ED-O Intelligent Digital Eddy Current Flaw Detector
Detection Objects: Large-sized and heavy workpieces (maximum dimensions: 800mm (L) × 300mm (W) × 300mm (H); maximum weight: 25kg)
Detection Feature: Dynamic detection
Instrument Detection Process:
The operator manually places the workpiece on the conveyor belt.
The conveyor belt moves at a constant speed and automatically triggers detection when reaching the coil position.
Detection is performed using the pre-multi-frequency method.
Qualified workpieces enter the qualified hopper based on detection results.
Casting and Forging:
Detection by Casting and Forging Mixed Material Detector:
Casting and Forging Mixed Material Detector:
Our advantages:
Adopting a semi-automated design of "manual feeding + automatic trigger detection", when non-conforming products are detected, the conveyor belt automatically stops and locates the defective workpieces.
This not only avoids the risk of misjudgment in fully automated rejection but also is particularly suitable for the inspection and debugging of precision components.